 |
Marine Venturi / Movers |
| |
|
| |
Compressed Air / Steam Driven Deck Mounted Ventilator / Exhauster |
| |
Compressed air or steam is injected to the venturi where air is direct to a main chamber and existing to small jet nozzels. This created a venturi section where large volume of air around the inlet and at the opening is moved into the venturi inlet and then air is pushed by high performance jet nozzels creating high velocity airflow at the outlet. Airflow rating are tested to AMCA standard 210. |
| |
Max Airflow range: 5,699 ~ 7,500 m3 / hr |
| |
|
| |
|
| |
|
| |
Texas Pneumatic Scalers |
| |
|
| |
|
| |
|
| |
Air Manifolds A. S. M. E. Certified |
| |
|
| |
 |
|
 |
| |
|
| The four way air manifold is a smaller version and much more accommodating to carry into confined spaces such as airlines for cabin and seat repair or for vessels. It is equipped with universal couplers and quick disconnect industrial couplers. Keeping work site uncluttered by having only one hose going to the work area. |
| |
Meet OSHA guidelines: ASME Approved Tanks
ASME pop-off valve (200 psi) to prevent excessive pressure buildup
Equipped with a guage to monitor working pressure
Brass drain cock to vent water droplets. |
| |
Model: TX-3AMF
Weight: 10kg, Tank diameter: 8” Working Pressure: 200p.s.i.
Tested Pressure: 300p.s.i. Capacity: 2.5 gal |
| |
|
ISSA Code: 59 06 91 |
|
|
 |
|
 |
|
| |
|
| |
|
| |
Venturi Type Air Movers |
| |
|
| |
Air Movement Fresh Air for Industries |
| |
TX-JF20 / TX-JF24 |
| |
20" Jet Fan / 24" Jet Fan |
| |
|
| |
|
| |
|
| |
|
| |
- Use for General Ventilation in any Location where compressed air available
- Use for exhaust as well as supply
- Suited for Ventilation of Tanks, Process Vessels, or other Confined areas for the removal of Hazardous fumes or Contaminated Air from Welding Sandblasting and other operation.
- Rated operating Pressure 40-110 PSI
|
| |
|
| |
|
| |
|
| |
The above free air induction ratio is a measure of efficiency of a venturi type air mover. The ratio is determined by dividing the total CFM discharged by the amount of air consumed. The accuracy of the figures of the free air induction ratio depends again on the accuracy of the method of testing. |
| |
|
| |
Total Air Flow and Consumed Air at various Inlet Pressures
American Standard Measurements Performance Total Air Flow Equals Compressed Air Consumed Plus Air Flow Induced |
| |
Inlet Pressure |
|
|
40PSIG |
60PSIG |
80PSIG |
|
|
Total Air Flow |
Total Air Flow |
Total Air Flow |
3AMS |
815 CFM |
981 CFM |
1182 CFM |
3AM |
1017 CFM |
1231 CFM |
1462 CFM |
6AM |
2385 CFM |
2885 CFM |
3347 CFM |
8AM |
3152 CFM |
4152 CFM |
4929 CFM |
9AMB* |
4959 CFM |
5780 CFM |
6810 CFM |
10AM |
4898 CFM |
6182 CFM |
7304 CFM |
|
Air Consumed |
Air Consumed |
Air Consumed |
3AMS |
36 SCFM |
50 SCFM |
62 SCFM |
3AM |
35 SCFM |
45 SCFM |
62 SCFM |
6AM |
73 SCFM |
98 SCFM |
124 SCFM |
8AM |
114 SCFM |
152 SCFM |
193 SCFM |
9AMB* |
139 SCFM |
190 SCFM |
245 SCFM |
10AM |
154 SCFM |
209 SCFM |
275 SCFM |
|
| |
|
| |
*This Particular air mover is design with a Butterworth flange base. The most common use of this design is in the Shipping Industry where they have port holes on the ship to accommodate a Butteworth tank cleaning machine. This air mover can be easily adapted to fit any opening as well as all of the other sizes. |
| |
|
| |
Pneumatic air movers have been tested at an independent laboratory. The free flow ratings listed above are based on tests to AMCA Standard 210.
Pneumatic air movers equalled or exceeded the air flow of competitively manufactured air movers. |
| |
|
| |
Free Air Induction Ratios at various Inlet Pressures |
| |
Digital Total Air Flow Discharge by amount of air consumed. |
|
|
40PSIG |
60PSIG |
80PSIG |
3AMS |
22.64 |
19.62 |
19.06 |
3AM |
29.06 |
27.36 |
23.58 |
6AM |
32.69 |
29.44 |
26.99 |
8AM |
27.65 |
27.32 |
25.54 |
9AMB* |
35.68 |
30.42 |
27.82 |
10AM |
31.80 |
29.58 |
26.66 |
|
| |
|
| |
|
